Anet rejection...

[madcatimages]

This was rejected for motiv>>>>
http://www.airliners.net/addphotos/reje ... 0_ces2.jpg (http://www.airliners.net/addphotos/rejections/big/20070320_ces2.jpg)

I know there are plenty of head on shots in the DB, whats wrong w/this one? Maybe b/c its portrait? Thats the only thing I can think of.

[USAF Pilot 07]

From my "ux-expert" opinion, it was rejected because the plane is cut off. Also, there is too much sky involved. Maybe try getting the whole plane in the picture next time, using a landscape view. And, it appears a little grainy in some areas...

[Matt Molnar]

It looks like you took it from a slight angle pointing up and to the right as opposed to level with the center of the propeller. The ends of the propeller are evenly spaced from the edges of the frame, which is good, but the wheels and the cockpit are off-center. Also, the wings are horizontal, but the ground is not. The sky looks awesome though. Maybe try recropping with less ground.

[madcatimages]

Thanx for the tips. I wasnt too sure as of how to level it, b/c if I level the ground(Horizontal) the wings look crooked. So I decided to level the wings.