Results 1 to 3 of 3

Thread: Printing Your Photos

  1. #1
    Administrator PhilDernerJr's Avatar
    Join Date
    Apr 2005
    Location
    Queens, NY
    Posts
    12,470

    Printing Your Photos

    Some of us are new to getting our photos printed. I'm not expert, but I'm pleased with my results and this is how I do it:

    Everything is the same as normal editing, except for three things:

    1) You'll crop is differently

    2) You'll need to zoom in and out a lot to gauge the results of your actions.

    3) You'll be sharpening differently.

    Usually the first step in editing the leveling your photo. Do that as you normally would. Then move on to cropping.

    As for cropping, choose whatever photo size you want to print at (8x10, 5x7, 4x6, etc).

    Most print shops require that you provide a "1/8 inch bleed" to your edits. This means just cropping it SLIGHTLY wider and taller than you would have, about 1/8 of an inch.

    It is also important that you set the crop's resolution to 300 dpi. This helps maintain good quality.

    From there, edit the photo as you would normally. Levels, brightness/contrast, color balance, saturation or whatever else you apply. But zoom in and out to make sure that your photo looks healthy at both 10% (get to 100% easier by pressing Ctrl + Alt + 0 (zero)).

    One other tip for editing these aspects of your photos....open up a regular edit of your shot that you might have on Airliners.net or JetPhotos.net. Compare the colors and contrast and such to make sure that you get it accurate to what it is supposed to be.

    Now for sharpening.

    What I usually do for print sharpening is zoom to 100% and apply Unsharp Mask at the following settings:

    Amount: 300
    Radius: .3
    threshold: 0

    The photo is a lot bigger, so although this may seem drastic for your normal editing, it's fine here.

    Then you should apply a second pass of Unsharp Mask. Open Unsharp Mask again. If you are making a 4x6 or 5x7, apply a radius of .2. If it's an 8x10, use a radius of .3 for this second pass.

    From here, start at .500, which might be too much, and work your way down, finding a sweet spot for you.

    It is nearly impossibly to avoid any indication of grain, but you want to avoid the speckle. Here is an example of grain that you can expect to see.



    The edit shown here is for an 8x10. Keep in mind that the size of this file on your screen is considerably larger than what the print size will be, so the print itself might not show all of the grain that you see on screen.

    So for this print, this much sharpening is a little too much. Though you should expect some grain, once you start to see the green speckle, you've certainly sharpened too much. The second pass here would probably be a lot better at a lower amount, or maybe even at a rdius of .2. However, if you saw this much grain for a 5x7 or 4x6, the results on the print would probably be absolutely disgusting. Don't allow for as much on the smaller prints.

    Here is the same photo prepped for a 4x6 file. You can see some grain, but that just disappears when you print the photo:



    So remember that you WILL have some grain, and that it's not necessarily a bad thing. If you try to avoid grain altogether, you very well might end up with a soft photo.

    That is pretty much it.

    Then save your file as a jpeg at the max quality and you're set. You should add the print's size at the end of the filename, like "ATA_738_N301TZ_LGA13Dep1_031881_8x10".

    Try editing a couple for various sizes, and upload it and LINK to it here (don't use the <img> codes, it'll be way too big). I'll let you know what I think.

    Let me know if I left anything out. If I didn't, I'm going to post this in the Photographer forum for other guys, too just to have. I know Art has a different style and I'm sure he'll want to voice his thoughts as well.

    Hope this helps.
    Email me anytime at [email protected].

  2. #2
    Member
    Join Date
    Apr 2005
    Location
    New Jersey
    Posts
    97
    LOL, of course I have a different style :) I'm a stylish kinda guy. LOL

    Actually you covered the bases pretty good. Minor changes to technique probably in the sharpening, but not much. The thing is, as you said, you have to fly by the seat of your pants and just see what happens. I know I have gotten good prints from images showing much more grain than you have above. It's very deceptive looking at the 300 dpi image on the monitor and not a real good indication of what it's going to look like in print.

    Good idea to indicate the size of the photo in the filename as that is important for future reference. I don't do that. I keep them in folders appropriate to the size.

    You might want to save some time and trouble. Try this ... take an A.net upload, convert it to 4 x 6 at 300 dpi (cropping involved) and sharpen accordingly. The print quality should be good. In fact just printing the A.net pic should be acceptable.

    Art

  3. #3
    Senior Member
    Join Date
    Apr 2005
    Location
    Scottsdale, AZ
    Posts
    1,139
    I have noticed that printing the a.net uploads (1024x680 at 72dpi) results in printable 4x6 photos. I've never been able to see a difference in quality vs. 300dpi at that size.

    Brian, when are you going to be ready to send the photos to ofoto? We should plan on doing it no later than the end of this week (maybe when you come over for the meeting on Saturday we can upload from my computer if you bring a CD with the pics).

    Josh

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •