Columnists

July 17, 2006

The Flat Panel Trainer

More articles by »
Written by: admin
Tags: , , , ,
Photo by Mike Communiello - Alteon Training Center

Photo by Mike Communiello – Alteon Training Center

Most people that know the difference between a 747 and the A320 are also aware of the technology that is being developed for the large A380 & the composite fuselage of the 787.

The technology development has not stopped with building airplanes and is extending to the areas of Training, which brings me to my topic of discussion, The Flat Panel Trainer.

The Flat Panel Trainer is a device that can train pilots on a single, often procedural or technical issue. The Instructors can isolate training on a Training session such as the Hydraulic system, electrical system, fuel system, or whatever system is covered in the lesson plan. In addition, a schematic of the system can be displayed as well.

Photo by Mike Communiello - Alteon Training Center

Photo by Mike Communiello – Alteon Training Center

The Instructors can position the schematics on any of the screens and the schematic is interactive as well, if you touch a valve on the screen, the valve will open or close.

How is this good for training? The lack of realistic flight controls and full screen visuals allows both student and instructor to focus on isolated issues. Furthermore, since the best of these devices also have the capability to display synoptic system operation, the impact and retention of data is greatly increased. Meaning, during the Ground School phase of training, the pilot is not trying to learn to fly the airplane, but rather, the pilot is learning how the systems operate.

Before the Flat Panel Trainer, the training would take place in the Full Flight Simulators (without motion), these Simulators are more expensive, require a large facility, an air conditioned room for the computers, etc.

Photo by Mike Communiello - Alteon Training Center

Photo by Mike Communiello – Alteon Training Center

The parts in the simulators are the same parts that are installed in the aircraft, so, generally are quite expensive. Since the Flat Panel Trainer is made for training, so to are the parts & will normally last longer, according to the manufacturer, “No matter how many times you make that switch go back and forth, you’re not going wear it out, when it’s graphically represented.”

Another benefit is cost, a Flat Panel Trainer can cost somewhere $300k -$500k and the Full Flight Simulators can cost up to $50 million dollars.

At Alteon Training in Long Beach, California, the Flat Panel Trainer is being used to train mechanics as well. The Flat Panel Trainer is an excellent tool for the mechanics in the area of troubleshooting as they can introduce fault/fails and get to see firsthand the effects of when different valves or relays are opened.

Photo by Mike Communiello - Alteon Training Center

Photo by Mike Communiello – Alteon Training Center

Just when you thought that I was finished, not quite, the Flat Panel Trainer is not device limited, meaning, it can be loaded for different cockpits as well. It can be a 737NG, or a 737-300, and even an A320, as long as the program is loaded in the computer.

As the aircraft are becoming more sophisticated, so are the trainers that are used to train both the pilots & the mechanics, airlines want the best training possible in the shortest amount of time, the Flat Panel Trainer is a device that will help the airlines accomplish their goal.



About the Author

admin





 
 

 

UAS in the USA: A History of Drone Regulations

The FAA has developed regulations for drone operators to operate their UAS for fun or for profit in a legal and safe environment, but the path was not always quick or straightforward.
by David J. Williams
1

 
 

“The Wings of Man” at Walt Disney World

Disney World's "If You Had Wings," sponsored by Eastern Air Lines, brought the spirit of aviation to the Magic Kingdom in the 1970s and 80s.
by Shea Oakley
6

 

 

The Mystique of the Boeing SST

I recently shelled out the most money I have ever paid for an airliner model in a lifetime of collecting. It is a five foot long needle-nosed monster with working variable sweep wings in Eastern Airlines colors. On its tail is ...
by Shea Oakley
0

 
 

An Open Letter From Your Captain

Dear Passenger, I see you. I see you, the family on the vacation you have been planning and saving up for years. I see you, the bright eyed hopeful applicant on your way to THE job interview that will make or break your career....
by Ben Zwebner
0

 
 

OPINION: Privatization Is Not The Answer For Our ATC System

Columnist Dave Williams takes a look at President Trump's proposal to privatize the nation's air traffic control system, and finds that there are more cons than there are pros.
by David J. Williams
0